Press Room

Article / Sep 27, 2021

How the drug services industry found itself prepared for a pandemic

C&EN, 26 September 2021

CDMO drug substance analytical chemistry RD scientists | Hovione

Supply chain discipline has paid off for contract development and manufacturing organizations amid an ongoing crisis

by Rick Mullin

 

The time to repair the roof is when the sun is shining,” said President John F. Kennedy in his 1962 State of the Union address. The metaphor rang true during the Cold War as an admonition to guard against complacency in times of prosperity. More broadly, it registered as the kind of sensible advice that people during all times frequently ignore.

At its outset, COVID-19 proved a case in point, as a containable outbreak spread relentlessly despite years of warning from public health authorities of an imminent pandemic. Yet the crisis also went on to showcase instances of preparedness, foremost of which was the rapid development and deployment of effective vaccines. The pharmaceutical industry emerged as a hero of the pandemic.

Less obvious but just as important was the rapid response of the pharmaceutical services industry, which does much of the heavy lifting for drug companies, working behind the scenes to coordinate the shipment of raw materials, produce active pharmaceutical ingredients (APIs), and formulate finished products within a complex international supply chain.

The sector had been on a 10-year profitability streak before 2020 and has done even better during the pandemic. It navigated challenges posed by COVID-19 on the strength of previous improvements to supply chain management and a yearslong campaign of diversifying services and expanding manufacturing capacity. Those proactive measures put the industry in a strong position when the storm hit early last year.

Indeed, industry watchers say the drug services sector displayed enviable resilience over the past 18 months. “There were issues—I don’t think there were any questions about that. But I think we knew how to deal with it,” says James Bruno, president of the consulting firm Chemical and Pharmaceutical Solutions.

Unforeseen transportation holdups caused problems early on, as did rattled production schedules when companies found they suddenly needed to produce large volumes of APIs such as remdesivir and dexamethasone on a very short timeline. But companies were able to work out the supply chain snags, Bruno says.

 

Related: European Consortium Seeks Autism Drugs

Roger Laforce, an industry consultant based in Switzerland, notes that as vaccines advanced toward emergency approval last year, several service companies, often called contract development and manufacturing organizations (CDMOs), were in a position to make vaccines happen. The big Swiss firm Lonza, for example, relied on a 2018 investment in prebuilt manufacturing shells at its facility in Visp, Switzerland, to meet a tight deadline for bringing production of the active messenger RNA ingredient in Moderna’s vaccine on line.

“People who’ve invested in operational excellence—having good supply chain operations and good management practices around their inventory—have actually been able to do pretty well,” says Wayne Weiner, who heads the consulting firm PharmaTech Solutions. “The other thing CDMOs have done a good job at is managing protection for their workers—keeping them safe so they could actually come in and run the plants.”

The pandemic also served to illustrate a dilemma that CDMOs have been bringing to the attention of governments in the US and Europe to little avail—heavy dependence on China for antibiotics and other generic drugs. The global drug supply chain emerged as front-page news when the Donald J. Trump administration considered a “buy American” executive order for pharmaceuticals, and the US government allocated funds to support domestic production of critical drugs. The European Commission also turned its attention to domesticating drug supply. And even as the Joe Biden administration attempts to undo much of the legacy of the Trump administration, the focus on the drug supply chain remains.

 

ABSORBING THE SHOCK

“The CDMO is the shock absorber for the pharmaceutical industry,” says Guy Villax, CEO of Hovione, a Portuguese CDMO with facilities also in China, the US, and Ireland. “Whenever there is a problem, they ask us to fix it.” When an unforeseen requirement for large-scale vaccine manufacturing emerged last year, for example, “the CDMOs got their act together,” Villax says.

And they did so under duress. Villax says that 150 workers at Hovione facilities have tested positive for COVID-19 since the pandemic began. “Every single person has recovered,” he says. There were transportation snags, especially in China, when the pandemic hit, but those were sorted out before long.

And business is “very good,” Villax says. “I remember in April and May of last year, I had a torrent of calls from journalists really keen that I could give them evidence so they could write stories to show that the supply chain was a catastrophe and all the pharmacies would be empty in a short time,” he says. “In fact, none of that happened. I think the supply chain is somehow really resilient.”

One reason for the industry’s preparedness was its ongoing investment in new production capacity well before the pandemic hit. Hovione came into 2020 with a new research center in Lisbon, Portugal, and plans to open a manufacturing building in Loures, Portugal, with new reactor capacity, Villax says. And the firm plans further capacity increases.

The Swiss CDMO Siegfried is among the firms that landed contracts serving vaccine makers. Marianne Späne, chief business officer, says Siegfried had to build a new production line from scratch at its site in Hameln, Germany, to fill and finish vials of Pfizer and BioNTech’s vaccine.

While the company had fill-and-finish capacity, “we had never done vaccines, and in record time we were able to build it up, to validate the process,” she says. Bringing production on line was a matter of close collaboration with Pfizer and BioNTech, Späne says, adding that Siegfried also has a contract to provide Novavax with fill-and-finish services for the vaccine it is developing.

And as it did before the pandemic, Späne says, Siegfried is continually expanding capacity for small-molecule drug manufacturing at all its sites—in Switzerland, Germany, France, Spain, the US, and China—often by debottlenecking or streamlining processes to increase output.

The CDMO is the shock absorber for the pharmaceutical industry. Whenever there is a problem, they ask us to fix it. - Guy Villax, CEO, Hovione

 

Read full article at C&EN.org

 

 

Also in the Press Room

See All

The latest from CDMOs, CMOs, and suppliers featuring Thermo Fisher Scientific, Lonza, SK pharmteco/Lotte Biologics, Hovione, Sai Life Sciences, BioCina, Alcami, Piramal Pharma/IntoCell and Roquette. Formulation Development/Drug Product Manufacturing: Hovione Completes Initial $100-M Investment Cycle in US Operations Hovione, a CDMO of drug substances and drug products, has completed an initial $100-million investment cycle at its site in East Windsor, New Jersey, as part of a strategy to increase its US operations and enhance its integrated drug-substance, drug-product intermediate, and drug-product capabilities. Upon completion, the site will cover more than 200,000 square feet.   The initial expansion phase includes a 31,000-square-foot building that will house two size-3 spray dryers (PSD-3) designed for production of amorphous solid dispersions (ASDs). This investment more than doubles Hovione’s spray-drying capacity in the US by expanding capabilities for ASD development and commercial manufacturing. Construction is underway at the New Jersey site, with GMP operations planned to start in the second quarter of 2026.  As part of this expansion, Hovione has also acquired additional adjacent land to enable future growth at the East Windsor site. The 125,000-square-foot greenfield will support large-scale production, including continuous and batch tableting capacity, and introduce the latest pharmaceutical technologies and digital innovation with enhanced quality control and R&D capabilities.    Read the full article at DCATvci.org  

Press Clipping

Supplier News: Thermo Fisher, Lonza, SK pharmteco, Hovione & More

Oct 30, 2025

Today marks the start of CPhI Frankfurt, a huge trade show in Germany focused on the supply of pharmaceutical ingredients and other services to the drug industry. C&EN editor in chief Nick Perkins, life sciences editor Laura Howes, and reporter Aayushi Pratap are all there to meet drug outsourcing executives and take the pulse of the sector. In advance of CPhI, Cambrex and Wilmington PharmaTech both just announced big investments in US plants that make active pharmaceutical ingredients. And the Portuguese pharmaceutical services firm Hovione says it has completed a $100 million investment in New Jersey (story below). (...) Hovione invests in spray-drying in New Jersey The pharmaceutical services firm Hovione says it has spent $100 million to expand its operation in East Windsor, New Jersey. The facility spray-dries drug ingredients to create amorphous solid dispersions, which improve solubility and bioavailability. The Portuguese company says the new spray dryers will begin operating in the second quarter of 2026. The New Jersey facility opened in 2002, making Hovione one of the longest-established European pharmaceutical services firms in the US, CEO Jean-Luc Herbeaux says in a press release. Hovione says it has purchased land adjacent to the East Windsor site on which it can add new facilities for services such as spray-drying and drug tableting. Hovione is also investing at its sites in Ireland and Portugal. —Michael McCoy   Read the full article at CEN.acs.org  

Press Clipping

Oct. 28 Business Watch: More plants closing in Europe, Novartis to pay $12 billion for biotech firm

Oct 28, 2025

Developing drugs with poor water solubility remains a major challenge for pharmaceutical manufacturers, because solubility impacts bioavailability and effective drug delivery. The vast majority of small molecule drug candidates have low water solubility. For more than two decades, the most successful particle engineering technology to improve drug solubility and bioavailability has been spray drying with an amorphous solid dispersion (ASD) platform. Spray drying improves the solubility of oral drugs, inhalable particles, and excipients, and increases the stability of heat-sensitive drug products. Hovione, recognized globally for its industry-leading spray drying capabilities, has recently completed a $100 million investment cycle to enhance its operations in New Jersey. This initiative has successfully doubled Hovione’s spray-drying capacity in the US, strengthening its position in the industry. Hovione’s Expanded U.S. Site in East Windsor, NJ  The first phase of the expansion in East Windsor, NJ, delivers a new 31,000 square foot facility and houses two size-3 spray dryers (PSD-3). This additional capacity allows Hovione to meet increasing customer demand for ASD development and good manufacturing practice (GMP) commercial production. GMP operations are scheduled to commence in the second quarter of 2026.  Hovione has also acquired 15 acres of neighboring land, strategically positioning itself for future growth and evolving customer needs for U.S. manufacturing. The newly acquired greenfield site will provide future support for PSD-4–scale commercial production as well as continuous and batch tableting production. It will also be a hub for centralized logistics, enhanced quality control laboratories, and next-generation research and development facilities.  A Global CDMO with a Growing U.S. Footprint  Hovione has operated in New Jersey for more than two decades, establishing itself with a strong U.S. presence for the production of drug substances, intermediates, and finished drug products. A continued emphasis on an integrated service offering, including spray drying, supports delivering innovative medicines to patients more quickly.  The expansion of the East Windsor site addresses the rising demand for U.S. manufacturing and is an integral part of the company's ongoing global growth strategy, with facilities in Portugal, Ireland, and Macau. The company continues to bolster a cohesive network for drug development and commercial manufacturing unified by a corporate quality system and governance framework.  The integrated offering enhances development speed and eases technology transfers by unifying the team's technical skills, proprietary technologies, and digital platforms to efficiently produce drug substance to drug products at a single-site, through Hovione’s “one site, one partner” vision. Furthermore, Hovione’s strategic partnership model offers customers exclusive access to advanced technologies and resources while aiding in the optimization of their development programs and ensuring sustained value creation.  End-to-End Spray Drying and Particle Engineering: From Grams to Tons Hovione is a global leader in spray drying and particle engineering. Services include solubility enhancement and controlled-modified release via development and production of ASDs of both small and large molecules, supporting various modalities. ASD-HIPROS, Hovione’s proprietary spray drying screening platform, identifies optimal formulations that offer optimal performance and stability. By increasing production volume in the US, Hovione will meet customer demand for spray drying services:  Development services in the laboratory (1 g – 1 kg batches)  Pilot scale production (0.5 – 25 kg batches)  Small-scale production (5 – 200 kg batches)  Large-scale commercial manufacturing (50 – 400 kg batches) A Commitment to Sustainability  Hovione’s core values include a commitment to sustainability at all facilities. This commitment is reflected in a business strategy that focuses on improving the communities where the company operates. Hovione’s sustainability policy and strategy align with the UN Sustainable Development Goals and include adherence to science-based targets in line with the Paris Agreement to address climate change. Meeting these goals has required a dedication to process intensification and ensuring sustainability of manufacturing processes. This has been possible through strategic planning and commitments from senior management to ensure sustainability is addressed throughout the drug development life cycle.  Partner with a Technology-Leading CDMO for U.S. Manufacturing   As demand for poorly water-soluble drug formulations continues to rise in the U.S., expanding spray drying throughput is essential to meet the need for innovative therapeutics. With proven leadership in spray drying to manufacture ASDs, Hovione is able to support pharmaceutical companies by solving their solubility challenges efficiently and reliably.  Partnering with a CDMO that combines global leadership, advanced technologies, and the necessary manufacturing capacity in the U.S., drug developers can expedite time to market, ensure quality, and deliver innovative medicines to patients faster.  If your company is seeking access to the latest spray-drying capabilities, expanded U.S. manufacturing capacity, and an accelerated path to regulatory filing and commercialization, contact our team today.     

News

Hovione is Expanding Spray Drying Capacity for U.S. Drug Manufacturing

Oct 27, 2025